PRINCIPLES OF OPERATION

34KV 1450 Joule Mining Cable Shop Surge Generator

The SG80034 surge generator generates voltages adjustable from 0 to 34kV and is typically used in the location of faults in mining cable shops. The maximum storage energy of the capacitor is 1450 J at 7.5, 17 or 34kV. All surge generators generate high voltages from the mains supply voltage, which is rectified and used to charge capacitors, which are in turn discharged into a faulty cable at adjustable intervals. The unit has an internal automatic dump contactor which discharges both the unit and the cable under test. This is activated when the unit is turned off or when a power failure occurs. It can be operated in the single shot or continuous pulsing method if correct selection is made.

The unit can also be used to perform insulation resistance tests up to the selected output levels.

Adret SG80034
SURGE GENERATOR

34KV 14500 Joule Mining Cable Shop Surge Generator

SPECIFICATION

Output Voltage: 7.5, 17, 34kV 1450 Joule (Ws)
Pulse Rate: Every 4 Seconds (15PPM)
Mains Condition Lockout System
Checks Mains input High
Checks Mains Input Low
Checks Mains Polarity Correct
Checks Earthing Integrity

If any conditions is out of specification the main contactor will not energize and the unit can not be powered up

Dimensions:
Enclosure: 308 Stainless Steel IP21
Test Environment: Temperature Indoor and outdoor: 10ºC to + 45ºC.
Humidity: ≤ 85%
Supply Voltage: 230V 50Hz, 16A

ACCESSORIES

Lid : Aluminium with canvas bag for test cables
Test Cables : 5m HT lead with high current clamps
Earth Lead : 5m yellow/green
Mains Lead : 1.5m 3 core